These imaging sensors serve a broad range of applications and markets including machine vision, medical electronics, broadcast equipment, traffic management, scientific instrumentation and photography. ams also supplies miniature camera modules for endoscopy-like applications.
ams offers its imaging sensors as complete turnkey solutions, and the whole process from specification and design, through prototyping and product qualification, to volume production, is implemented by ams.
The ams family of pipelined global shutter sensors features high frame rates for a wide range of demanding professional and industrial applications. Their resolutions range from VGA up to 50Mpixels. Rolling shutter image sensors feature high 71Mpixel resolution for use in demanding industrial applications.
The CMV8000 is a global shutter CMOS image sensor with 3360 by 2496 pixels in a 4/3“ optical format. The image array consists of 5.5 µm by 5.5 µm pipelined global shutter pixels, which allow exposure during read out while performing CDS operation reducing fixed pattern and dark noise significantly. The CMV8000 has 16 digital LVDS outputs (serial) each running at 600 Mbps, which results in 104 fps frame rate at full resolution in 10-bit mode. Higher frame rates can be achieved in row-windowing mode or row-subsampling mode. A 12-bit per pixel mode is available at reduced frame rates.
The CMV20000 is a high sensitivity pipelined global shutter CMOS image sensor with a resolution of 5120 x 3840 pixels. Pipelining means that exposure during read out is possible. The state-of-the- art pixel design makes true correlated double sampling (CDS) possible which reduces the fixed pattern noise and dark noise significantly. The imager integrates 16 LVDS channels each running at 480Mbps resulting in a 30fps frame rate at full resolution (12 bits per pixel). Driving and read-out programming can be set over a serial peripheral interface. An internal timing generator produces the signals needed for read- out and exposure of the image sensor while external exposure triggering remains possible. The CMV20000 is derived from a custom CMOS image sensor. This sensor is not for sale for traffic applications.
The CMV50000 is a high speed CMOS image sensor with 7920 x 6004 effective pixels (47.5Mp) developed for machine vision and video applications. The image array consists of 4.6μm pipelined 8T global shutter pixels which allow exposure during read out, while performing true CDS (Correlated Double Sampling) operation. The image sensor has 22 12bit sub-LVDS data outputs. The image sensor also integrates a programmable analog gain amplifier and offset regulation. Each output channel runs up to 830 Mbps maximum which results in 30 fps frame rate at full resolution in 12 bit. Higher frame rates can be achieved in row-windowing mode or row-subsampling mode. These modes are all programmable using the SPI interface. All internal exposure and read out timings are generated by a programmable on-board sequencer. External triggering and exposure programming is also possible. Extended optical dynamic range can be achieved by a dual exposure HDR mode.
The CMOS line scan image sensor family from ams consists of 23 variants, offering a range of resolution and pixel size specifications. Resolution options range from 2kpixels up to 16kpixels and line rates extend up to 80,000 lines/s.
Dragster is a digital line-scan sensor using two types of basic elements: a single line element with 7µm x 7µm and 3.5µm x 3.5µm pixel size, and a dual line element with mono and color option and 7µm x 7µm pixel size.
The NanEye miniature CMOS image sensors and corresponding camera module configurations are available in modular form factors as small as 1 mm x 1mm. Various optics options are available.
NanEye is a miniature sized image sensor for applications where size is a critical factor. The ability of the camera head to drive a signal through a cable up to 3m makes this the ideal component for minimal diameter endoscopes. With a footprint of just 1mmx1mm, it features a 249x250 resolution with a high sensitive 3um x 3um rolling shutter pixel. The sensor has a high frame rate of about 43fps to 62fps adjustable over power supply. The sensor includes a 10bit ADC and a bit serial LVDS data interface. The data line is semi duplex, such that configuration can be communicated to the sensor in the frame brake.
NanEye Stereo offers the smallest physical dimensions of a digital 3D solution, a true system on chip camera head with fully self timed readout sequencing, AD conversion to 10 bit and bit serial data transmission over LVDS. With it’s 2 x 250 x 250 pixels at 3um pitch and footprint of just 2.2x1mm and height of 1.78mm with integrated optics comprises high aligment of the 2 cameras heads due to wafer level packaging. Futhermore, frame synchronization is also possible.